Set Up Level 4 Stock Types

Overview  

This video will show you how to set up your level 4 stock types. A step by step guide can be found below the video.


Steps 

  1. In System Setup, open System Data.
  2. Double click on the Level 4: Sub Type (additional) line to open the table.
  3. Enter Edit Mode.
  4. Use the New button to add a new Level 4 Stock Type.
  5. Add a description.
  6. Use the drop down in the Type column to map your Level 4 Stock Type to the required Level 2 Stock Type.
  7. Use the drop down in the Mid Type column to map your Level 4 Stock Type to the required Level 3 Stock Type (if used).
  8. Save the screen.
The following explain how to create stock types:
  1. Set Up Level 1 Stock Types
  2. Set Up Level 2 Stock Types
  3. Set Up Level 3 Stock Types





Did you find this article helpful?